(EURO CODE)EN10025-2-MATERIAL PROFILE (유럽형강 특징, 스펙)

1. OWNER & SUPERVISOR : EXXON MOBIL

2. EPC CONTRACTOR: TR (TECHNICAS REUNIDAS)

 

EUROCODE를 적용하는 첫 프로젝트, EURO CODE가 적용된 자재를 사용해야 했습니다.

KS/ ASTM에 적응되어 있던 저에게 명칭부터가 생소한 부분이 있습니다.

---

[MATERIAL SPECIFICATION]
BC1: 2012
Design Guide on Use of Alternative Structural Steel 
to BS5950 and Eurocode 3

1.H-SHAPE (HEA/ HEB/ HEM)

[SPECIFICATION]

European wide flange beams
1) Dim.: HE A, HE B and HE M 100 - 1000 in accordance with former standard EU 53-62; HE 1000 with GHE> GHEM in accordance with ASTM A 6/A 6M - 12 HE AA 100-1000 in accordance with AM standard

2) Tolerances: EN 10034: 1993 HE 100 - 900; HE 1000 AA-M ASTM A 6/A 6M - 12 HE 1000 with GHE>GHE M

3) Surface condition: according to EN 10163-3: 2004, class C, subclass 1

• H-SHAPE는 일반적으로 HEA/ HEB/ HEM으로 분류됨
• HEA/ HEB/ HEM 순으로 H형강의 높이(h) 및 web/ flange 두께가 두꺼워짐
• HEA와 HEB의 flange 폭은 동일하며, HEM이 다소 큼
• HEA 부재는 주로 보 부재로, HEB 부재는 기둥 및 주 거더용으로 사용.
• HEM의 경우, 하중을 많이 지지해야 하는 중앙부에 사용하는 기둥용 부재로 주로 사용됨.

2. H-SHAPE (HL/ EXTRA WIDE FLANGE BEAMS)

[SPECIFICATION]
European extra wide flange beams
1) Dimensions: ASTM A 6/A 6M - 12

2) Tolerances: ASTM A 6/A 6M - 12
HL 1000 AA - M+HL 1100, EN 10034: 1993

3) Surface condition: according to EN 10163-3: 2004, class C, subclass 1

3. H-SHAPE (HP/ WIDE FLANGE BEARING PILES)

[SPECIFICATION]
Wide flange bearing piles
1) Dimensions: in accordance with AM standard

2) Tolerances: EN 10034: 1993

3) Surface condition: according to EN 10163-3: 2004, class C, subclass 1

4. I-SHAPE (IPE/ EUROPEAN I BEAMS)

• KS I-형강처럼 Flange 단부로 가면서, 두께가 줄어들지 않는 특징을 보임

[SPECIFICATION]
European I beams
1) Dimensions:
IPE 80 - 600 in accordance with former standard EU 19-57 IPE AA 80 - 550, IPE A 80 - 600, IPE O 180 - 600, IPE 750 in accordance with AM standard

2) Tolerances: EN 10034: 1993

3) Surface condition: according to EN 10163-3: 2004, class C, subclass 1

5. I-SHAPE (IPN/ EUROPEAN STANDARD BEAMS)

• KS의 I-형강과 동일한 형태

[SPECIFICATION]
European standard beams
1) Flange slope: 14%

2) Dimensions: IPN 80 - IPN 550 DIN 1025-1: 1995, NF A 45-209: 1983 IPN 600 DIN 1025-1: 1963

3) Tolerances: EN 10024: 1995

4) Surface condition: according to EN 10163-3: 2004, class C, subclass 1

6. ANGLE(L-SHAPE) (L / EQUAL LEG ANGLES)

[SPECIFICATION]
Equal leg angles
1) Dimensions: EN 10056-1: 1998

2) Tolerances: EN 10056-2: 1993

3) Surface condition: according to EN 10163-3: 2004, class C, subclass 1

[SPECIFICATION]
Equal leg angles
1) Dimensions: AM Standard

2) Tolerances: EN 10056-2: 1993

3) Surface condition: according to EN 10163-3: 2004, class C, subclass 1

7.ANGLE(L-SHAPE) (L / UN-EQUAL LEG ANGLES)

[SPECIFICATION]
Unequal leg angles
1) Dimensions: EN 10056-1: 1998

2) Tolerances: EN 10056-2: 1993

3) Surface condition: according to EN 10163-3: 2004, class C, subclass 1

8. CHANNEL (U/ CHANNELS WITH TAPER FLANGES)

[SPECIFICATION]
Channels with taper flanges
1) Dimensions: in accordance with AM standard

2) Tolerances: EN 10279: 2000

3) Surface condition: according to EN 10163-3: 2004, class C, subclass 1

9. CHANNEL (UPE/ CHANNELS WITH PARALLEL FLANGES)

[SPECIFICATION]
Channels with parallel flanges
1) Dimensions: DIN 1026-2: 2002-10

2) Tolerances: EN 10279: 2000

3) Surface condition: according to EN 10163-3: 2004, class C, subclass 1

---

EURO CODE 자재를 알아보았습니다.

자료가 필요하신 분은 쪽지 주세요.

 

감사합니다.